Fluke Linkrunner

 

   Manufacturer: Fluke Networks
   Manufacturer Part Number: LINKRUNNER
   Availability: In Stock
   Shipping: Free Shipping on ground orders over $100
   Technical Data Sheet PDF


                        Price : $495.00

 

Product Specifications

Media Access 10BASE-T and 100BASE-TX
Identifies 10BASE-T 100BASE-TX, 100 Base-T (full or half-duplex), Gigabit Ethernet, Token Ring, Telco, Cable ID, unpowered PC or hub, Auto-MDIX ports Auto Negotiation or strapped port
Cable Tests Length, open, short, splits, wiremap, crossed, straight through
Ports RJ-45 LAN, RJ-45 Wiremap
Interface Push-button navigation of icon/menu driven view
Power 2 AA standard batteries. Optional NiMH batteries and battery charger available. Approximately 20 hours continuous use with 4 hours of pinging.
Dimensions 2.75’w x 3.75’h x 1.25’d 6.98cm x 9.52cm x 3.17cm
Weight 4.5 oz/128 grams with batteries installed
Warranty One year

 

The Fluke Linkrunner is a network cabling multimeter. It can troubleshoot or verify network cabling in an instant. This remarkable cable tester fits easily in your toolbag. It is very light weight which means if you are working with it all day it will not become a nuisance. The Linkrunner will become an essential piece of your arsenal as you get used to it.

Fluke Linkrunner Overview

Today’s networks are faster and more complicated than ever. The majority of network problems stem from wiring and connectivity issues.  The cabling technicians out in the field need to have a quick method of identifying problems with the physical layer within the network. The Linkrunner  will help you quickly identify problems and isolate them to hardware, cabling or network equipment.  This is essential to productivity because you no longer need to wait for a full size cabling tester to be delivered.

Click Here To Purchase The FLUKE  NETWORKS LINKRUNNER

                                                                                         

Linkrunner Protective Case

The following tasks can be performed by the Linkrunner:

→Ping – Confirm you connectivity to network equipment

→Cable verification – Multiple tests help you quickly determine if cable is the problem.

→Cable ID – Identify cable that has not been labeled, saving you tons of time.

→Improved efficiency –  Speed up the escalation process by identifying physical or link layer problems.

 

Most network/cable technicians or project managers carry a laptop to the jobsite to troubleshoot DNS or pinging problems. The Fluke Linkrunner will eliminate the need to carry a laptop for these simple network troubleshooting issues. This can save you from a possible laptop drop and an aching shoulder! By bringing a laptop to work every day you also run the risk of it being stolen. The Linkrunner weighs a whopping 4.5 oz, so imagine the difference of carrying around a laptop vs. the Linkrunner all day.

 

A few additional features:

  • Built in Toner
  • Check cable distances
  • Opens, shorts & Split Pairs
  • Wiremap & Continunity
  • Straight through or Crossover
  • 10/100 Mbps

 

Manufacturer’s of equipment will sometimes advertise false speeds on equipment and cable. The Linkrunner will identify the actual speed transmission.  All network activity indicators can be identified. You also have the power to identify weather a jack is Ethernet, telco, inactive, NIC or token ring. You can set manual or DHCP mode for IP pinging. This meter allows you to ping a default router or user identified piece of equipment. There is a built in ping responder with return trip time. You may also see if the DNS server or end user hardware is on your local network or a remote network.

The Linkrunner’s CDP/EDP will determine port locations on Telecommunications Room equipment.  Identifying pins 1-8 can pinpoint cable fault & short locations. The built in tone generator can be used with an Intellitone probe for tracing cables.  The hub port will flash so you can visually determine where your cable is located.

The Fluke Linkrunner has dimensions of 2.75’w x 3.75’h x 1.25’d 6.98cm x 9.52cm x 3.17cm. It weighs 4.5 oz/128 grams with batteries installed. For the price this tool is a must have for any technician out in the trenches. This will increase your productivity and improve accuracy of identifying problem areas within the network. The test meter has a one year manufacturer’s warranty.

 

The Fluke Linkrunner Kit is also available. The Linkrunner Kit consists of:

  • Kit Contents: Multimeter, Cable ID, Wiremap Adapter, RJ45 Coupler, Probe, Test Clips, Battery, Charger, Software
  • For Use With: Type KDW-CD LinkRunner Key Device Watch Software

 

Click Here To Purchase The


FLUKE NETWORKS LINKRUNNER-KIT

 

 

Share

Leave a Comment

{ 1 trackback }